Visible / low-light / digital input
Embedded video input selected around the platform path.
Compare visible-light, low-light, analog, digital and network video-input modules by interface, power, mounting, optics and customer workflow.
System role
Scene to embedded camera module to customer video path or compute.
The category defines where a module may enter the customer architecture. Exact interfaces, ownership boundaries and validation requirements still change by model.
- 01 Visible or low-light scene Evaluation path
- 02 Embedded camera module Evaluation path
- 03 Analog / digital / network video output Evaluation path
- 04 Customer video path or compute Customer-owned
- 05 Customer-owned perception or operator workflow Customer-owned
Exact models and source-listed parameters
Source-listed parameters support comparison. Final selection still requires the exact model, revision, interface and customer test conditions.
Compare the currently documented analog low-latency camera configurations. Every value remains tied to the exact model and requires confirmation against the evaluation unit.
CUSTOMER VERIFICATION REQUIRED
| Model | Sensor / resolution | FOV | Low illumination | Latenz | Input | Dimensions |
|---|---|---|---|---|---|---|
| THY-ALC-001-M | 1/1.8 CMOS / 1800 TVL | 125° | F1.0 / 0.0000001 lux | Source states low latency; value not listed | DC 5–40 V | 19 × 19 × 28 mm |
| THY-ALC-001-I | 1/2.9 CMOS / 1800 TVL | 150° | F1.8 / 0.01 lux | ≤30 ms | DC 5–40 V | 19 × 19 × 19 mm |
| THY-ALC-001-G | 1/2.9 CMOS / 1800 TVL | 110° | F1.0 / 0.000001 lux | Source states low latency; value not listed | DC 5–40 V | 19 × 19 × 27 mm |
| THY-ALC-001-H | 1/2.9 CMOS / 1800 TVL | 100° | F1.0 / 0.000001 lux | Source states low latency; value not listed | DC 5–40 V | 19 × 19 × 27 mm |
| THY-ALC-002-L | 1/2.8 CMOS / 1500 TVL | 125° | F2.0 / 0.5 lux | ≤30 ms | DC 5–24 V | 19 × 19 × 26.8 mm |
| THY-ALC-002-I | 1/2.8 CMOS / 1500 TVL | 150° | F2.0 / 0.5 lux | ≤30 ms | DC 5–24 V | 19 × 19 × 19 mm |
| THY-ALC-001-N | 1/3 CMOS / 1200 TVL | 140° | F2.6 / 0.01 lux | ≤30 ms | DC 5–40 V | 14 × 14 × 18.8 mm |
| THY-ALC-003-O | 1/2.7 CMOS / 1200 TVL | 112° | F2.0 / 0.5 lux | ≤30 ms | DC 5–24 V | 19 × 19 × 27 mm |
- Low-illumination figures are source-listed values, not guarantees of usable scene output or downstream AI performance.
- Video standard, connector, pinout, current, weight and measured latency must be confirmed for the exact unit before design-in.
What to confirm
Selection questions before a model enters evaluation.
- 01
What video output, electrical interface and host workflow does the platform accept?
- 02
What mounting envelope, FOV, illumination, power and latency conditions must the installed module meet?
- 03
Which acceptance criteria determine whether the image remains usable after installation?
Verification gates
A category match is not yet a platform match.
Each evaluation unit must remain tied to its exact model, revision, selected options, source status and customer acceptance criteria.
Electrical and interface
Connector, pinout, direction, voltage level, signaling, protocol, host, driver and firmware.
Mechanical and environmental
Envelope, mounting, optics, cabling, vibration, heat path, installation and operating conditions.
Workflow and acceptance
Video or data path, degraded-state behavior, measurements, thresholds and change triggers.
Next engineering decision
Review Embedded Camera Modules against your platform constraints.
Share the platform context and the engineering constraints already known. Thyraon will use them to frame the next evaluation step.